 |
Standard chunky flogger with black chap
suede falls.
( one of my best sellers).
The shaft is hand turned from stained Mahogany finished with a braided
hanging loop. The falls are very supple black 2½mm chap suede.
Very supple and quite heavy, it has a great thuddy effect. Falls cut
from between 5mm up to 2cm and 18" drop for the standard price
of
£26
Longer drop and better quality timber available
at extra cost mail me for details
Item code SF01
|
 |
Standard chunky suede flogger with black and
red chap suede falls.
The shaft is hand turned from stained Mahogany finished with a braided
hanging loop.
The falls are very supple black 2½mm chap suede.
Very supple and quite heavy, it has a good thuddy effect and looks great
in action.
Falls cut at 10mm with a 46cm drop for the standard price of £28
Item code SF02
|
 |
Standard chunky leather flogger with falls in
1.5mm smooth finished black leather.
The shaft is hand turned from stained Mahogany finished with a braided
hanging loop.
The generous amount of falls are cut thin so not as much thud as the
suede but a great scratchy sting
Falls cut at 5mm with a 46cm drop for the standard
price of
£26
Item code SF03
|
 |
Standard chunky rubber flogger with black rubber
falls.
The shaft is hand turned from stained Mahogany finished with a braided
hanging loop.
The falls are cut from black 1mm natural rubber sheet.
Very heavy and quite a hard hitter.
Falls cut at 10mm with a 46cm drop for the standard price of £26
Item code SF04
|
 |
Dragons tail flogger
I had a few requests for these and despite being a little unsure of
just how usable it would be I came up with this and was pleasantly surprised
result.
A 7½" shaft matched with a 19" tail in 2.5mm black
leather. Despite its light weight it has a surprising sting in its tail,
not quite as easy to master as a normal flogger but worth the effort
and well worth a go if you want something different.
£20
Item code S70
|
 |
High-tech high-quality Chrome ball chain
flogger
A 1" x 10" chrome steel shaft finished with polished African
Blackwood end caps and falls in either 20 strands of 3mm or 12 strands
of 4½mm chrome ball chain for an overall length of 23".
These look and feel great - quite dangerous if used to hit but brilliant
for sensation play either heated up or straight from the fridge and
trailed across the body and they are suitable for use with the violet
wand.
£36
Item code S69
|
 |
Fur tail flogger
This one is a real pussycat (joking). If you want a super sensual little
toy these are gorgeous. A classy 6½" antique looking hardwood
handle matched with a mink tail fall for an overall length of around
17". Available in deep purple and bright red.
Pure decadence at a reasonable price
£12
Item code S68
|
 |
Standard rubber floggers
A basic range of rubber floggers on 9" x 1" tubular shafts
covered with high grip tape and finished with a red leather inlay and
wrist loop overall length is 24".
Choice of falls -
350 strands of 1 mm bungee (very sensual with a bit of a thud if used
hard)
2mm X10mm sheet rubber (nice heavy all rounder)
3mm round rubber cord (very stingy)
£18.00 (set of 3 for £50)
Item code(s) S66
|
 |
Small Leather Flogger
This one is small with a lot of bite.
It fits in the pocket and stings like hell.
A 7" slim hardwood handle matched with 3mm square oiled leather
falls for an overall length of 22".
This one is probably more suited to the experienced player, it can leave
marks and even used gently it has quite a sting to it.
£6.50
Item code F63
|
 |
Heavy latex flogger.
If you like a lot of latex in your flogger this one is for you. Around
500 strands of 1mm bungee latex (around 4 time more than most bungee
floggers on the market) set into one of my chunky handles for an overall
length of 24". This one has a good thud to if used hard, but can
be incredibly sensual if used to stroke rather than hit.
£28
Item code F61
|
 |
Large Horse-hair Flogger.
This is a big one. A 13" polished
and waxed Purpleheart shaft matched with a full ¼lb of high-quality
genuine horsehair and a pommel of your choice in a variety of exotic
hardwoods.
The one shown is a traditional grip in african blackwood or if you prefer
a more radical design click here.
As I genuinely hand make these floggers myself it costs no more to design
your own pommel and have yourself a truly unique item.
This is a good choice if you are after a big well priced and very usable
flogger. It is quite a heavy one though. I fit the pommel with an internal
lead insert which helps to balance the flogger but it is a little hard
on the wrist after a while.
£40
Item code F54
|
 |
Light weight deluxe flogger
Shaped and polished Purpleheart shaft with either soft deerhide or pig
suede.
A great little flogger for all of those sensitive places.
One you can let yourself go with without doing to much damage and great
fun for all levels of play.
Overall length around 22"
£18
Item code F49
|
 |
Bit of a novelty this one but quite usable all
the same.
The 7½ inch x 1 inch stock is turned from polished Brazilian
Purpleheart. The fall are in supple black leather barbed wire.
It is made in the same way as the real stuff and looks exactly the same.
Be careful, it is small ( 19 inches overall) but very stingy.
£18
Item code F47
|