Other Stuff

In addition to our range of floggers, I also make other items such as gags, spreader-bars, wrist-straps etc.
Keep an eye on this page as I will add items as they become available
Your suggestions are always welcome, of course.

	The Mindfold The mindfold takes blindfolds to a new dimension, TOTAL darkness with you eyes wide open and it won't mess up your eye shadow. Easy to use, light weight and no peeking around the edges - at the price this has got to be the most effective blindfold on the market. £12.00 Note - These are the new ones in matt black, not the old shiny ones that tended to split in use.
	Key ring flogger A great little item to hang on your key ring, mobile or hand bag. Hand turned exotic hardwood handle and real leather falls made and finished to the same standard as my full size floggers, this one is only 7" long. £5.00

RESTRAINTS
A good pair of conventional buckle type cuffs can set you back over £50 ....... These are not meant to replace them,
more to supplement them (without the need for a second mortgage) and get around a few of the problems we have
found with most designs. These are quick and easy to use, just slip them on and pull tight (no messing with buckles that are either too tight or too loose). They pull tight when you struggle and relax when you do, so can be worn for a length of time without circulation problems.
They are made from soft 2mm suede with no sharp edges (much less likely to leave marks than leather).
The cuffs can be supplied with either with heavy weight D rings (great for ropes or trigger clips)
or with trigger clips (good with chain) and it saves you having to buy clips, etc. to connect them together.

Belt clips Trigger hook belt clip in black leather or rubber. These fit over most belts (up to 3" wide) and are attached via a heavy duty press stud Price £3.50

Some of our restraint items in use.....

Pair wrist cuffs fitted with D-rings or with trigger clips - £6.50

Pair ankle cuffs fitted with D-rings or with trigger clips - £7.00

Set of 2 wrist cuffs and 2 ankle cuffs fitted with D-rings
(just add rope and a 4 poster bed) - £12.50

Set of 2 wrist cuffs and 2 ankle cuffs fitted with trigger clips
and a 2/14" chrome ring to connect them together - £12.50

hog-tie 4 way clip - £4.50

I am now also making the cuffs in black 3mm "ostler" leather still soft suede on the inside they are a bit stronger than the all suede version and have a great retro institutional look about them.
Great fun these - you can have someone restrained in about 30 seconds - £8.00

HARDWARE

	Stainless Steel Carabiners Nice quality, polished AISI 316 stainless steel with a spring loaded gate. Smaller sizes are great for cuffs and chains etc. The big 80mm ones are rated at 870kg so plenty strong enough for suspension ( I have put 200lb on the medium one with no problems). small 50mm (5mm bar) £2.00 each medium 60mm (6mm bar) £2.50 each large 80mm (8mm bar) £3.50 each
	2 1/4" Chrome steel ring (works great with rope as well) £1.50 each
	Heavy-duty double-ended chrome trigger clips. A must have item great for attaching two sets of cuffs /ropes etc. £1.85 each

This is a good buy for the 99% of us who don't have their own dungeon and don't want to have to answer questions like "Why do you have ring bolts in the lounge ceiling?". Just throw the strap over the door and close the door and you have somewhere to hang your submissive, obviously no good for full suspension but great for a bit of light bondage. Like all of our bondage gear the strap is 2mm suede so it is quite soft and unlikely to do damage. We tried this item on a few different internal doors and found it works on most as long as you have a 1.5-2mm gap at the top it is ok. Supplied with a double slip on cuff for £10.50 (left image) Or separately for £6.50 (centre image shows 'front' of door, image on right shows the back) (Whilst we are happy to give you a refund if it doesn't work on your doors, we will not take responsibility for any damage you do to your property)

SPREADERS
I always hold a few spreader bars in stock, but can make them to your own requirements.



I use Ramin or Ash for these and they have a satin chrome end cap.
The ring bolts are set over 2" into the shaft and should stand up to most types of use.

HOME